Multitek MultiPower M850MP1 Digital Power Meter

Please click on links below for more detailed product information:

The M850MP1 MultiPower is a complete 3-phase digital universal metering system in a standard 96 x 96 mm DIN case.  It can be used on any voltage system with a wide range of inputs.  The auxiliary power supply is a universal supply for both AC& DC volts.  The one unit covers the majority of applications without any modification required, which makes the M850 ideal for stocking.

It measures line Voltages and Currents, Neutral Current, System Frequency, System W, A and VA Demands, System W, A and VA Maximum Demands, System Active Power, System Reactive Power, System Apparent Power, System Active Energy, System Reactive Energy and System Power Factor. 

The M850 incorporates a BLUE or RED LED display and universal power supply. It features the options of pulsed outputs, an RS485 port using Modicon's Modbus or BACnet protocols and Modbus MSTP over an ethernet network.

Voltage and current measurements are true RMS.

Multitek MultiPower M850-MPD DC Meter

Product Code:

LED Display

M850MP1      MultiPower standard unit
M850MP1AB  1A,AC input
M850MP1FC   400Hz calibration
M850MP1OS    with internal RS485 card
M850MP1PE   19-69V,DC aux
M850BAC*      BACNet protocol
M850MKW     AC current & kWh only
M850MPA      AC current & max demand current
M850MPV      3-Phase, AC Volts only
M850MPH      Hours Run
M850MVM     333mV,DC current clamps
M850MP1OS  with internal RS485 card
M850THD       Total harmonic distortion 

Plug-in Communications Modules

M850PULSED Pulsed Output
M850RS485    RS485 MODBUS
M850ET            Ethernet
   

 

MultiPower SpecificationS Return to TOP

View PDF Datasheet below. Some browsers do not support this function, you can Download Here.

 

PROGRAMMING SUPPORT Return to TOP

SUPPORT DOWNLOADS

Topic

Download Link
M850-MP1 Quick Start Guide Click to View (right click choose save as to download)
M850 CT Programming Click to View (right click choose save as to download)
M850 Demand Reset Programming Click to View (right click choose save as to download)
M850 System Type Programming Click to View (right click choose save as to download)
M850 VT Ratio Programming Click to View (right click choose save as to download)

 

Support Software Return to TOP

PROGRAM DOWNLOADS

Please read this before using the software.

MultiLog (V2.0.0.3)
(03/04/2012)



MultiViewEx (V3.0.0.7)
(21/01/2013)


M850 Firmware Update
(2.12.1116)


RS485 Sniffer


Multidin Monitors
(System Monitor)
M550 Software
(System Monitor)
M560 Software
(System Monitor + M955xD2Aot)
(Revised 18 Aug 04)
System Monitor
(Revised 22-08-2005)

MultiLog is a Windows application that monitors and logs the measurements taken by an M850. Up to 7200 points can be stored and displayed whilst logging or viewed historically. (Windows 7 compatible).

MultiViewEx is a monitor program with a basic logging facility. For use with the M850 and the latest M550 family. (Windows 7 compatible).

The M850's operating program can be updated by downloading the Firmware Update package. Please read and retain the instructions (212kB pdf) before attempting the upgrade.

A program that monitors the traffic on an RS485 Modbus bus.
(Windows 7 compatible).

The SYSTEMMONITOR.EXE program (which replaces monitor95) displays all measurements, incorporates a logging facility and communicates with M80x (MultidinV3+), M81x (Multiled), M84x (MultiDigit), M550 (PowerCom), M560 (PowerSig) and the M570 (PowerRelay) units. This software runs on computers using Windows 98, 2000, XP and NT operating systems.

Monitor and setup programs are provided for the M550 (PowerCom), M560 (PowerSig) and the M570 (PowerRelay). PowerCom and PowerRelay use SystemMonitor only. This software runs on computers using Windows 98, 2000, XP and NT operating systems.

All the software is provided free of charge with the understanding that Multitek accepts no responsibility for the application nor will Multitek provide software support free of charge.
The following programs have been discontinued-
MONITOR95.EXE
M8xxMON.EXE
DLGv1MON.EXE
DLGv2MON.EXE
M82xMON.EXE
RS485Mon.exe
If you require one of the above obsolete programs for an older version of meter please contact the factory.

 

MultiPower Specs & WirING Return to TOP

View PDF Datasheet below. Some browsers do not support this function, you can Download Here.


What are you looking for? | Let us help | 800-523-9194 | request@pc-s.com
What is your Challenge,
Need Description or Goal?
*First & Last Name:  
*E-Mail & Phone:  
*Company:
Address:
*City & State:  
*Zip Code & Country:  
Much appreciated...what engine,
site, or source referred you?
Searched words or other?